McKinney & the DFW metro · Slab leak helpMon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Blog how slab leak detection works McKinney, TX
Home › Blog › Detection Guide

How Slab Leak Detection Works

Detection finds the leak before any digging starts: meter, pressure, listening, location. Here is each step, and what it tells you.

McKinney Slab Leak Pros · 2026-11-17 · Detection Guide

The short version

Problem: Detection confirms a leak exists, then finds where it is — using the meter, pressure tests, listening equipment, and line location.

What to do: The leak is pinpointed before any concrete is opened, and the repair plan is built from the location report.

When to call: Call for detection when the meter moves with every tap off, or when the signs point to a leak under the slab.

Step 1: the meter test

Every detection visit starts at the water meter. Turn off every tap, toilet, washing machine, ice maker and irrigation system in the house, then watch the meter — usually in a box near the street or on the side of the house. If the dial keeps moving, water is going somewhere it should not, and the leak is on your side of the meter. If the meter holds still, the leak is not on the supply side.

The test has to be done with everything off, and that includes the things people forget: the ice maker, the irrigation system, a dripping tap, a running toilet. Any one of them can move the meter and look like a leak. A meter that moves slowly is a small leak; a meter that spins fast is a large one. Either way, the next step is the pressure test.

Step 2: pressure tests

The hot and cold supply lines are isolated and pressure-tested one at a time. The line is pressurised and the gauge is watched for a drop over time. A line that holds pressure is sound; a line that loses pressure is leaking, and the size of the drop gives a sense of how large the leak is. Hot and cold lines are tested separately, because a warm floor points to the hot line and the test needs to confirm it.

Sewer lines are tested differently — with a camera or a smoke test — because they are not under supply pressure. The separation matters: a supply leak and a drain leak are found with different tools, and the pressure test is what decides which tools come out.

Step 3: acoustic listening

Acoustic listening is the core of the work. A sensitive microphone on the floor hears the sound of water escaping a pipe — a hiss or a rush that the ear cannot pick up through concrete. The operator moves across the floor, comparing the sound at each point, until the loudest spot marks the leak. Concrete carries sound well, so a leak under a slab can be heard from several feet away.

The work is slow and methodical: a floor is listened to in a grid, the loudest points are checked again from another angle, and the location is confirmed before it is marked. A leak that is heard from several directions, with the sound converging on one spot, is a leak that is found.

Step 4: line location and confirmation

Electronic line location traces the pipe itself, so the crew knows which line is leaking and which direction it runs. The location is checked against the sound: the loudest point and the pipe path should agree. Where they do not, or where the leak is too quiet to hear, the crew adds methods — thermal imaging for a hot line, tracer gas for a quiet leak, a camera for a drain line.

When the methods agree, the leak is marked on the floor — a small area, usually no bigger than a dinner plate — and the report is written. The report records the line, the location, and the readings, and the repair plan is built from it.

What the report is for

The detection report is the document the repair decision is made from. It records the meter readings, the pressure test results, the leak location, and the condition of the line as far as the investigation can tell. It states, plainly, what was found and where. The homeowner keeps it, and the repair — by any crew, at any time — starts from it.

The report is also the record the insurer asks for. It separates the water damage from the soil movement, it dates the leak, and it shows the work was found by testing, not by guessing. Keep the report with the photos, the bills, and the meter readings.

Related: Slab Leak Detection · slab leak help in McKinney

Questions

Frequently asked questions

Questions people ask about this topic, answered plainly.

Most detection visits take a few hours. The meter and pressure tests are quick; the listening work takes longer, because the operator has to work across the floor and confirm the loudest point from more than one angle. A home with two leaks, or a leak that is hard to hear through thick flooring, takes longer.

Yes, for access — the crew needs to get to the meter, the fixtures, and every room with a floor to listen to. The homeowner is also the one who can describe the signs: where the floor is warm, where the damp patch is, when the bill jumped.

A water meter reading, a pressure test gauge, an acoustic ground microphone, an electronic pipe locator, a thermal imaging camera for hot lines, and tracer gas for quiet leaks. Drain lines are checked with a camera or a smoke test. Each tool answers a different question, and the location is marked only when the methods agree.

Yes. Leaks under bathrooms are common, because that is where the lines run. The listening and location work happens from above the floor, so the fixtures are not disturbed. The repair — through the floor or by tunnelling — is planned from the location, and the fixtures are moved only if they sit directly over the leak.

Some leaks are hard to find — a slow drain-line leak, or a leak under thick stone flooring. When listening alone is not enough, the crew adds methods: tracer gas, thermal imaging, or a camera in the drain line. The methods stack until the location is confirmed, and the leak is not marked on one method alone.

The work is the same — meter, pressure, listening, location, and a written report. The difference is what happens next: a location visit ends with the report, and no repair is started. A detection visit is usually the first step toward a repair by the same crew.

Still have questions?

Call Now to reach a local slab leak professional — describe the water and the rooms it reached.

Call Now

Contact

Call now for slab leak help

Tap Call Now to reach a local slab leak professional. Tell them the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped — and where in the house they show up.

Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

Call Now

Before you call

  • Shut off the main water supply if it is safe to do so.
  • Move valuables, rugs and electronics off wet floors.
  • Take photos of the damp floor, the water meter, and the rooms affected.
  • Stay away from wet outlets, switches and light fixtures.
  • Note when the signs started, and whether the water meter moves when every tap is off.
McKinney Slab Leak Pros — helper
☎ Call Now