McKinney & the DFW metro · Slab leak helpMon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Blog signs of a slab leak mckinney McKinney, TX
Home › Blog › Signs Guide

Signs of a Slab Leak in McKinney

A slab leak hides under the floor, so the signs show up around it: a warm tile, a damp patch, a bill that jumped. Here are the signs, and the meter test that confirms them.

McKinney Slab Leak Pros · 2026-11-17 · Signs Guide

The short version

Problem: A pipe leaking under the concrete slab shows up as a warm floor, a damp patch, a bill that jumped, the sound of running water, low pressure, or cracks.

What to do: Turn off every tap and watch the water meter — if it keeps moving, water is going somewhere it should not.

When to call: Call for detection when the meter moves, when the floor is damp and warm, or when water is near electrical fixtures.

A warm patch on the floor

The most recognisable sign of a slab leak is a floor that is warm in one spot. A hot water line leaking under the slab warms the soil, the concrete, and the flooring above it, and the heat comes up through the floor in one place. Tile and wood show it most clearly — a tile that is warm underfoot while the tiles around it are cool, a patch of wood flooring that feels warm in the middle of a cool room.

The warm area is usually roughly circular, a few feet across, and it stays warm all day, because the leak runs all the time. A floor that is warm in the morning and cool by evening is more likely sun or a heating vent. A floor that is warm all the time, in the same place, points to the pipe. Walk the floor barefoot, and mark where it is warm.

A damp patch that comes back

A damp patch on the floor or carpet that returns after mopping is the second classic sign. The water comes up through the slab from a pipe underneath, so the floor is damp again a few hours after mopping — in the same place, the same shape, a little larger each time. A spill dries and stays dry; a leak does not.

Carpet padding holds water for days, and a carpet that feels dry on top can still be wet underneath. Tile grout darkens and stays dark. Wood flooring absorbs water at the edges and can cup or warp. The EPA notes that mold can begin to grow on damp surfaces within 24 to 48 hours, which is why a damp floor that stays damp matters.

A water bill that jumped

A bill that jumps in one month, with no change in use, is one of the strongest slab leak signs. The water goes into the soil under the slab, not onto the floor, and a small leak can run for weeks before the floor shows anything. The bill, though, shows it immediately: water that leaks away is water that is metered.

Compare the bill with the same month last year, and note the date of the jump. A small jump is a small leak, a large jump is a large one, and a meter that spins fast with every tap off is a leak running now. Keep the bills — the insurer asks for the record.

The sound of running water

Hearing water running when every tap is off usually means a pipe is leaking somewhere out of sight. The sound can be a hiss or a rush, and it is often heard at night, when the house is quiet, or in a room with hard floors that carry sound well. Check every tap, toilet, and appliance first — a running toilet can sound the same. If everything is off and the sound continues, the leak is in the pipes.

The sound is loudest near the leak, and the operator follows it across the floor with a microphone. The loudest point marks the leak. The sound itself is the guide — and the meter test confirms it.

Low pressure, cracks, and smells

Low water pressure across the house — every shower weaker, every tap slower — can come from a supply line leaking under the slab. A single weak tap is usually a fixture problem; the whole house going weak is a line problem. Cracks in the floor or walls, doors that stick, and a floor that slopes can come from the leak washing out soil, or from the clay swelling on the wet side. And a musty smell near the floor points to damp materials that have not dried.

Any one of these signs is a reason to check the meter. Turn off every tap and appliance, then watch the water meter — if it keeps moving, water is going somewhere it should not. That test takes a few minutes, and it decides what happens next.

Related: Warm spot on the floor · Slab Leak Detection · slab leak help in McKinney

Questions

Frequently asked questions

Questions people ask about this topic, answered plainly.

Usually the bill, or the floor. A bill that jumps in one month with no change in use is the first sign for many homeowners, because the water goes into the soil before the floor shows anything. Others notice a warm patch on the tile, or a damp patch that comes back after mopping. Any one of them is a reason to check the meter.

Turn off every tap, toilet, washing machine, ice maker and irrigation system, then watch the water meter. If the dial keeps moving, water is going somewhere it should not. Walk the floors barefoot for warm patches, and mop any damp patch to see whether it comes back. Those three checks — meter, warmth, dampness — are the ones a homeowner can do.

Yes, for a while. A small leak under the slab can run for weeks before the floor shows anything, and the bill is often the first sign. That is why the meter test matters: it finds a leak the eye cannot see, and it finds it before the floor is damaged.

No. The water goes into the soil first, and it may take weeks to reach the floor — or it may never reach the floor at all, if the soil absorbs it. A leak can show up only as a bill, or only as a sound, or only as a warm patch. The meter test is the check that finds it regardless of the signs.

Water on the floor that is getting worse, a meter spinning fast with every tap off, or water near electrical fixtures — those are call-now signs. A damp patch, a warm spot, or a bill that jumped are urgent, but they can wait for a detection visit. The meter test decides it.

The signs are the same everywhere, but the cause is local: Houston Black clay, an expansive soil that swells when wet and shrinks when dry, stresses the pipes under McKinney slabs. A home here can have a leak and clay movement at the same time, and the detection report separates the two.

Still have questions?

Call Now to reach a local slab leak professional — describe the water and the rooms it reached.

Call Now

Contact

Call now for slab leak help

Tap Call Now to reach a local slab leak professional. Tell them the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped — and where in the house they show up.

Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

Call Now

Before you call

  • Shut off the main water supply if it is safe to do so.
  • Move valuables, rugs and electronics off wet floors.
  • Take photos of the damp floor, the water meter, and the rooms affected.
  • Stay away from wet outlets, switches and light fixtures.
  • Note when the signs started, and whether the water meter moves when every tap is off.
McKinney Slab Leak Pros — helper
☎ Call Now