Sewer Line Leak Detection in McKinney, TX
Drain and sewer lines run under the slab too — and when they leak, the signs are different: damp floors after use, odours, slow drains. Sewer leaks are found with cameras and smoke, not pressure tests.
Need help with a slab leak?
Call Now to reach a local slab leak professional. Describe the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped.
Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
What this service does
A home has two pipe systems under the slab, and they are easy to confuse. The supply lines carry water in under pressure; the drain and sewer lines carry it away, downhill, without pressure. A supply leak runs all the time. A drain leak runs only when water goes down the drain — a shower, a flush, a washing machine cycle. That difference is the first thing that separates them, and it is why the two systems are investigated with different tools.
A sewer leak under the slab shows up differently from a supply leak. The floor is damp after use, not all the time. There is an odour near a drain or a floor that was not there before. Drains run slow, or gurgle. The bill does not jump — a drain leak does not use water, it loses water that has already been used. And the meter does not move with every tap off, because the supply lines are sound. If the meter holds still and the floor is damp, the drain side is where the investigation starts.
The pipes themselves tell the story. Older McKinney homes often have cast iron or clay drain lines under the slab, and both age in the ground. Cast iron corrodes from the inside, thinning until it cracks. Clay pipe joints shift as the Houston Black clay moves, opening gaps where water escapes. Newer homes have PVC, which lasts longer but can still crack where the soil has settled. The material and the age of the line shape what the camera finds.
Sewer water is treated as contaminated water throughout the work. That is not a precaution; it is the rule. People and pets are kept away from wet areas, the rooms are not used while the investigation runs, and the cleanup after a sewer leak is handled as contaminated-water work. A homeowner should not mop up a sewer leak with household tools, and should not run taps or flush while the leak is being investigated — every flush sends more water into the soil.
One thing people get wrong about sewer leaks is assuming the damp floor is a supply leak. The meter test is the check that separates them, and it is run before any drain work starts. If the meter moves, the supply side is leaking. If it holds still, the drain side is the suspect — and the camera goes in. Getting that order right keeps the job small: a supply leak found by a drain investigation, or a drain leak found by a supply investigation, is a job done twice.
Before you call
- Shut off the main water supply if it is safe to do so.
- Move valuables, rugs and electronics off wet floors.
- Take photos of the damp floor, the water meter, and the rooms affected.
- Stay away from wet outlets, switches and light fixtures.
- Note when the signs started, and whether the water meter moves when every tap is off.
How sewer line leak detection works in a McKinney home
The visit starts with the meter. Every tap is turned off and the meter is watched. A meter that holds still with everything off points away from the supply lines and toward the drain side. The symptoms are mapped next: which rooms are damp, whether the dampness follows use, whether drains are slow or gurgling, and whether there is an odour. The pattern points to the line — a damp floor near a bathroom points to the bathroom drain; a damp floor near the kitchen points to the kitchen line.
Then the camera goes in. A small camera on a flexible cable is run into the drain line from a cleanout or a fixture, and the picture shows what the pipe looks like from the inside: cracks, breaks, separated joints, roots, or a belly where the pipe has settled and water pools. The camera has a locator on it, so the picture is matched to a point on the floor above — the break is located before any concrete is opened.
Where a camera cannot reach, or where the leak is suspected but not seen, a smoke test is used. Harmless smoke is blown into the drain system, and it escapes through any break or open joint — showing up above the floor, or at a roof vent, or through a crack in the slab. The smoke test finds leaks the camera cannot see, and it confirms the location the camera pointed to. The report records the line, the location, and the condition of the rest of the line.
What the service includes
Meter test first
The water meter is checked with every tap off, to separate a supply leak from a drain leak.
Symptom mapping
Which rooms are damp, whether the dampness follows use, and whether drains are slow or gurgling.
Camera inspection
A camera is run into the drain line to show cracks, breaks, separated joints, roots, or a settled belly.
Electronic location
The camera locator matches the picture to a point on the floor above, so the break is located before any work starts.
Smoke testing
Harmless smoke is blown into the drain system to find leaks the camera cannot see.
Report and repair plan
The line, the location, and the condition of the rest of the line are recorded, and the repair plan follows from it.
How the work runs
Call and describe the signs
Damp floors after use, odours, slow drains — and which rooms they show up in.
Meter test
Every tap off, the meter watched — a still meter points to the drain side.
Map the symptoms
Which rooms are damp, whether the dampness follows use, and how the drains behave.
Camera inspection
The camera goes into the drain line and shows the break, the joint, or the root mass.
Locate and confirm
The camera locator marks the break on the floor; a smoke test confirms it where needed.
Repair plan
The report records the line and the location, and the repair plan follows from it.
Tools and methods used
Drain camera
A small camera on a flexible cable that shows the inside of the drain line — cracks, breaks, joints, roots.
Camera locator
Matches the camera picture to a point on the floor above, so the break is located before any digging.
Smoke test machine
Blows harmless smoke into the drain system to find leaks the camera cannot see.
Moisture meter
Reads the walls, flooring and slab to map where the drain water has been.
Supply leaks vs sewer leaks
The meter test is the line between them. A supply leak moves the meter with every tap off, because the line is always under pressure. A sewer leak does not move the meter, because the supply lines are sound — the water escapes after it has been used. The signs differ too: a supply leak shows up as a bill that jumped, a sound of running water, or a warm floor; a sewer leak shows up as dampness after use, odours, and slow drains.
The tools differ as well. Supply lines are pressure-tested and listened to; drain lines are camera-inspected and smoke-tested. The repairs differ too: a supply repair is a pipe replacement under pressure; a sewer repair is a drain replacement, often by tunnelling, because the line runs deeper and the work is messier. The two systems share the house, but they are investigated and repaired differently.
What the camera finds in McKinney homes
In older McKinney homes, the camera usually finds cast iron or clay. Cast iron corrodes from the inside, thinning until it cracks — the camera shows the rough, scaled surface and the break. Clay pipe joints shift as the Houston Black clay moves, and the camera shows the gap where water escapes. Roots follow the water into the gap, and the camera shows the root mass blocking the line.
In newer homes, the camera usually finds PVC — and PVC fails differently. It cracks where the soil has settled under it, or where a joint was stressed during construction. The camera shows the crack and the water escaping through it. Whatever the material, the camera and the locator together give the location, and the repair plan is built from that location.
A drain line leaking under the slab, unseen
A leak under the slab keeps running — washing out soil, lifting flooring, and stressing the foundation.
The break located by camera and marked
The leak is located with listening and electronic equipment before any concrete is opened.
Problems sewer line leak detection solves
- A drain line leaking under the slab
- Damp floors that appear after use, not all the time
- Odours near a drain or a damp floor
- Slow or gurgling drains with a wet floor
- Not knowing whether the leak is supply or drain
- Cast iron or clay lines ageing in moving clay soil
Signs you need sewer line leak detection
- A damp floor that appears after a shower or a flush
- An odour near a drain or a damp patch on the floor
- Slow drains or gurgling sounds
- A meter that holds still with every tap off, but a damp floor
- Wet flooring near a bathroom or kitchen
- A musty smell that follows drain use
- A drain that backs up and then clears, more than once
- An older home with cast iron or clay drain lines
Related problems
Damp floor or carpet · Running water sound · Foundation cracks
Industries that use this service
Restaurants & Hospitality · Commercial Offices · Apartments & Condos · All industries →
Frequently asked questions
Questions people ask about sewer line leak detection, answered plainly.
The meter test is the check. Turn off every tap and appliance, then watch the water meter — if it holds still, the supply lines are sound, and the leak is more likely on the drain side. A damp floor that appears after use, odours, and slow drains point the same way. The camera confirms it.
The camera shows the inside of the drain line: cracks, breaks, separated joints, roots, or a belly where the pipe has settled and water pools. The camera has a locator on it, so the picture is matched to a point on the floor above — the break is located before any concrete is opened.
Sewer water is treated as contaminated water. Keep people and pets away from wet areas, do not run taps or flush while the leak is being investigated, and do not clean it up with household tools. The cleanup after a sewer leak is handled as contaminated-water work.
Harmless smoke is blown into the drain system, and it escapes through any break or open joint — showing up above the floor, at a roof vent, or through a crack in the slab. The smoke test finds leaks the camera cannot see, and it confirms the location the camera pointed to.
Yes. Water escaping from a drain line soaks the clay under the slab, and wet clay swells — or washes out, and the slab settles. A sewer leak and a foundation problem can look alike, which is why the leak is found and fixed before any foundation questions are answered.
Not always. Cast iron corrodes from the inside, and the camera shows how far it has gone — a single break is a repair, a line that is thin along its length is a replacement. The camera report, not the age alone, decides it.
Only over the marked break, and only after the camera has located it. Sewer repairs are often done by tunnelling, because the line runs deeper and the work is messier — but the location is always confirmed first, from above the floor.
Because a drain leak runs only when water goes down the drain. A shower, a flush, a washing machine cycle — each one sends water through the break, and the floor is damp after use and drier in between. A supply leak, by contrast, runs all the time, because the line is always under pressure.
Slab leak in your McKinney home?
Call Now to reach a local slab leak professional. Describe the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped.
Call now for slab leak help
Tap Call Now to reach a local slab leak professional. Tell them the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped — and where in the house they show up.
Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Before you call
- Shut off the main water supply if it is safe to do so.
- Move valuables, rugs and electronics off wet floors.
- Take photos of the damp floor, the water meter, and the rooms affected.
- Stay away from wet outlets, switches and light fixtures.
- Note when the signs started, and whether the water meter moves when every tap is off.