McKinney & the DFW metro · Slab leak helpMon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Slab leak detection McKinney, TX hero
Home › Services › Slab Leak Detection

Slab Leak Detection in McKinney, TX

A pipe leaking under a concrete slab does not announce itself with a puddle. It shows up as a warm tile, a damp patch, a bill that jumped, or the sound of running water when every tap is off. Detection finds the leak first — then the repair follows.

Call Now

McKinney & the DFW metroDetection, location & repairPinpoint location before any digging

Need help with a slab leak?

Call Now to reach a local slab leak professional. Describe the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped.

Call Now

Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

1
Shut the water off firstThe main supply stops the leak at its source — if you can reach it safely.
2
Pinpoint the leakListening equipment and electronic location find the leak before any concrete is opened.
3
Repair under the slabSpot repair, tunnelling, or repiping — the method follows the leak, not the other way round.
4
Document everythingPhotos, meter readings and notes help when you talk to your insurer.
Slab Leak Detection

What this service does

Most McKinney homes sit on a concrete slab, with the water lines buried in the soil underneath it. When one of those lines leaks, the water has nowhere to go except into the soil, up through the slab, and into the flooring above. There is no basement to catch it, no crawl space to look into, and no puddle under a sink to point at. The leak is hidden by the floor itself, which is why detection is a separate job from repair — and why it comes first.

Detection starts with the simplest test of all: the water meter. Turn off every tap and appliance in the house, then watch the meter. If the dial keeps moving, water is going somewhere it should not, and the leak is on your side of the meter. A pressure test comes next — the line is pressurised and watched for a drop. Those two tests confirm that a leak exists. They do not say where it is. That is the job of the listening and electronic equipment.

Acoustic listening is the core of the work. A sensitive microphone on the floor hears the sound of water escaping a pipe — a hiss or a rush that the ear cannot pick up through concrete. The operator moves across the floor, comparing the sound at each point, until the loudest spot marks the leak. Electronic line location traces the pipe itself, so the crew knows which line is leaking and which direction it runs. Thermal imaging adds a third check for hot water lines: the floor above a hot leak reads warm on the camera.

In McKinney, detection has a local reason to be thorough. The soil under the city is Houston Black clay, an expansive soil that swells when wet and shrinks when dry, and that movement is the main reason pipes fail here. A line that leaked once in clay soil can leak again a few feet away, so the crew maps the line, not just the leak. The detection report — where the leak is, which line it is on, and what the rest of the line looks like — is what the repair plan is built from.

One thing people get wrong about detection is the order of the calls. Many homeowners call a foundation company first, because the floor has cracked or the wall has moved. But a slab leak and a foundation problem can look alike, and fixing the foundation while a pipe is still leaking under it wastes the work. Detection first, then the repair decision — that order keeps the job small and the record clear for the insurer.

Before you call

  • Shut off the main water supply if it is safe to do so.
  • Move valuables, rugs and electronics off wet floors.
  • Take photos of the damp floor, the water meter, and the rooms affected.
  • Stay away from wet outlets, switches and light fixtures.
  • Note when the signs started, and whether the water meter moves when every tap is off.

Call Now

Understanding

How slab leak detection works in a McKinney home

The visit starts at the water meter, usually in a box near the street or on the side of the house. Every tap, toilet, washing machine and ice maker is turned off, and the meter is watched. A meter that moves with everything off means a leak on the house side of the meter. A meter that holds still points somewhere else — a running toilet, a dripping tap, or a leak on the city side. That first test takes a few minutes and it decides everything that follows.

Next comes the pressure test. The water lines are pressurised and the gauge is watched for a drop over time. Hot and cold lines are tested separately, because a warm floor points to the hot line and the test needs to confirm it. A line that holds pressure is sound; a line that loses pressure is leaking, and the size of the drop gives a sense of how large the leak is. Sewer lines are tested differently — with a camera or a smoke test — because they are not under supply pressure.

Then the listening starts. The operator works across the floor with an acoustic sensor, listening for the sound of escaping water. Concrete carries sound well, so a leak under a slab can be heard from several feet away, and the sound grows louder as the sensor moves toward it. The loudest point is marked, then checked again from another angle. Electronic line location confirms the pipe runs where the sound says it does, and a thermal camera is used when the line is hot. When the methods agree, the leak is marked on the floor — a small area, usually no bigger than a dinner plate.

Slab leak detection McKinney, TX 1
Slab leak detection McKinney, TX 2
Slab leak detection McKinney, TX 3
Included

What the service includes

Meter and pressure testing

The water meter is checked with every tap off, then the hot and cold lines are pressure-tested separately to confirm a leak and identify which line is losing pressure.

Acoustic listening

A sensitive microphone on the floor hears the sound of water escaping the pipe through the concrete, and the loudest point marks the leak.

Electronic line location

The pipe is traced electronically so the crew knows which line is leaking, which direction it runs, and where it connects.

Thermal imaging for hot lines

A thermal camera reads temperature differences on the floor — a hot water leak under the slab shows up as a warm area.

Leak marking and report

The leak location is marked on the floor, and the report records the line, the location, and what the rest of the line looks like.

Meter re-check after repair

After the repair, the meter is checked again with every tap off, to confirm the leak is fixed and no second leak is hiding behind the first.

Process

How the work runs

1

Call and describe the signs

A warm floor, a damp patch, a bill that jumped, the sound of running water — and where in the house they show up.

2

Meter and pressure tests

Every tap is turned off, the meter is watched, and the hot and cold lines are pressure-tested separately.

3

Acoustic listening

The operator works across the floor with a ground microphone, following the sound of escaping water to its loudest point.

4

Line location and confirmation

Electronic location traces the pipe, and thermal imaging or tracer gas confirms the leak when listening alone is not enough.

5

Marking the leak

The leak is marked on the floor — a small area, usually no bigger than a dinner plate — and the report is written.

6

Repair decision

Spot repair, tunnelling, or repiping — the method follows the leak location, the pipe, and the condition of the rest of the line.

Slab leak detection McKinney, TX process 1
Slab leak detection McKinney, TX process 2
Slab leak detection McKinney, TX process 3
Slab leak detection McKinney, TX process 4
Tools & methods

Tools and methods used

Acoustic ground microphone

Listens for the sound of escaping water through concrete and flooring, and narrows the leak to a small area of floor.

Electronic pipe locator

Traces buried water lines so the crew knows the exact path of the leaking pipe before any work starts.

Pressure test gauge

Measures whether a line holds pressure, and how fast it loses it — the test that confirms a leak exists.

Thermal imaging camera

Reads surface temperatures on the floor to find the warm area above a hot water line leak.

Slab leak detection McKinney, TX equipment
Slab Leak Detection

What detection does not do

Detection finds the leak; it does not fix it. That separation matters, because a detection-only visit gives you a location and a report, and the repair decision is made from that report — not from a guess made while digging. If the line is in poor condition along its length, the report may point to repiping rather than a spot repair, and that is a decision worth making with the location in hand, not after the floor is open.

Detection also does not find every leak in one visit. A home can have two leaks — a hot line and a cold line, or a supply line and a drain line — and the second one only shows up once the first is fixed and the meter is checked again. That is why the meter test is repeated after every repair: a meter that still moves means there is more to find.

Slab Leak Detection

Slab leak detection in McKinney clay soil

McKinney sits on Houston Black clay, in the USDA very high shrink-swell class, and that soil is the reason detection here is done the way it is. Clay that swells when wet and shrinks when dry moves the ground under the slab, and the movement stresses the pipes buried in it. A copper line that has been flexed by soil movement for twenty years can fail at a joint; a line under a post-tension slab can fail where the slab itself has moved. The detection crew maps the line because the soil, not just the pipe, is part of the problem.

The other McKinney pattern is the mix of housing eras. The median home was built in 2006, and the city has grown from about 195,000 people in 2020 to about 236,000 in 2025 (U.S. Census Bureau estimates). Newer homes in the north and west have post-tension slabs and newer lines; 1990s homes in Stonebridge Ranch, Craig Ranch and Eldorado have older lines in the same clay. Detection reads the same in both — meter, pressure, listening, location — but what the report recommends can differ, because the age of the line changes the repair.

Problem

A leak under the slab, hidden by the floor

A leak under the slab keeps running — washing out soil, lifting flooring, and stressing the foundation.

Solution

The leak located to a small marked area

The leak is located with listening and electronic equipment before any concrete is opened.

Problems solved

Problems slab leak detection solves

  • A warm patch on a tile or wood floor with no visible source
  • A damp patch on flooring or carpet that comes back after mopping
  • A water bill that rises without any change in use
  • The sound of running water when every tap is off
  • Low water pressure across the house
  • Not knowing whether the problem is a leak, clay soil movement, or both

Call Now

Signs

Signs you need slab leak detection

  • A warm spot on the floor, usually tile or wood
  • Damp flooring or carpet that returns after mopping
  • A water bill that jumps without explanation
  • The sound of running water with every tap off
  • A water meter that moves when everything is off
  • Low water pressure in more than one room
  • Cracks in the floor or walls near a damp area
  • A musty smell near the floor that was not there before
Questions

Frequently asked questions

Questions people ask about slab leak detection, answered plainly.

Detection work is scoped by the visit, not by a list of figures — the size of the home, the number of lines, and the methods needed all shape it. The visit itself is what you are paying for: meter and pressure tests, acoustic listening, line location, and a marked location with a report.

Most detection visits take a few hours. The meter and pressure tests are quick; the listening work takes longer, because the operator has to work across the floor and confirm the loudest point from more than one angle. A home with two leaks, or a leak that is hard to hear through thick flooring, takes longer.

Yes — that is the point of detection. Acoustic listening, electronic line location, thermal imaging and tracer gas all work from above the floor. The concrete is opened only after the leak is located, and only over the marked area.

Some leaks are quiet — a slow drain-line leak, or a leak under thick stone flooring. When listening alone is not enough, the crew adds methods: tracer gas in the line, a thermal camera for hot lines, or a camera in the drain line. The methods stack until the location is confirmed.

Yes. The report records the leak location, the line, the meter readings and the pressure test results — the same record an insurer asks for. Keep the photos and the readings with the report, and note the date the signs started.

Yes. A home can have a hot line leak and a cold line leak, or a supply leak and a drain leak. That is why the meter is checked again after every repair — a meter that still moves means there is more to find.

Yes. A wet floor shows where the water came up, not where the pipe is leaking — water travels under the slab before it surfaces. Detection finds the pipe, so the repair opens the floor in the right place.

No. Detection works from above the floor — listening, location, thermal imaging and meter tests. The floor is opened only for the repair, and only over the marked leak area.

Slab leak in your McKinney home?

Call Now to reach a local slab leak professional. Describe the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped.

Call Now

Contact

Call now for slab leak help

Tap Call Now to reach a local slab leak professional. Tell them the signs — a warm floor, damp flooring, the sound of running water, or a bill that jumped — and where in the house they show up.

Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

Call Now

Before you call

  • Shut off the main water supply if it is safe to do so.
  • Move valuables, rugs and electronics off wet floors.
  • Take photos of the damp floor, the water meter, and the rooms affected.
  • Stay away from wet outlets, switches and light fixtures.
  • Note when the signs started, and whether the water meter moves when every tap is off.
McKinney Slab Leak Pros — helper
☎ Call Now